A 7x7 shed has 49 sq ft of floor. Drawn to scale with a clear aisle, it holds a push mower, a shelving unit but not a wheelbarrow, and it can take a 42 in lawn tractor if the door is at least 5 ft wide. Kits this size run under $1,500 on Amazon.
By Glen · Last updated 2026-10-10 · Researched from manufacturer specifications, published code summaries and verified owner reviews · How we pick
A 7x7 is a compact garden shed. At 49 sq ft it holds a mower and hand tools comfortably, but it fills quickly once bikes or a wheelbarrow go in. Below, two common loads are drawn to scale on a 7x7 floor, so you can see what actually fits once you leave yourself a way in.
What fits in a 7x7 shed, drawn to scale
Garden tools.
Drawn to scale, one square is 1 ft. The dashed band is the clear aisle from the door. Does not fit: Wheelbarrow.Bikes and a mower.
Drawn to scale, one square is 1 ft. The dashed band is the clear aisle from the door. Does not fit: Push mower.
How many of each item fit in a 7x7?
Each row is that item on its own, packed flat on the floor with a clear aisle kept from the door. Hanging bikes and stacking bins beat these numbers; parking a mower across the aisle does not count.
Item
Fits
Riding mower / lawn tractor (42 in deck)
1
Zero-turn mower (48 to 54 in deck)
1
Push mower (handle folded)
4
Two-stage snow blower
none
Wheelbarrow
none
Adult bike (on the floor)
2
Trash or recycling can (96 gal)
none
Gas grill (off-season)
2
Shelving unit (18 x 48 in)
2
Workbench (2 x 6 ft)
2
Kayak (floor)
none
Is a 7x7 shed big enough for a riding mower?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 7x7 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Not sure about your own mix of gear? The shed size calculator adds up every item's footprint, multiplies by 1.5 for aisles and reach, and names the smallest standard size that works.
What does a 7x7 shed cost?
We track 5 real 7x7 kits, under $1,500. At the measured median price per square foot for each material, 49 sq ft works out like this:
Material
Rough kit range
Resin (HDPE)
$500 to $1,500
Vinyl (PVC)
$650 to $700
Steel
$150 to $650
Wood
$500 to $5,500
Kit estimates only. Budget roughly $75 to $175 for a 4 in gravel pad, around 4 anchors, and fit-out on top; all of these are rough planning estimates that vary by region and retailer. The shed cost calculator totals it for your material and foundation.
Want a shortlist instead of the full table? See the best 7x7 sheds at three budgets.
What foundation does a 7x7 shed need?
Most resin and steel kits want a flat, level, well-drained base a little larger than the shed. For a 7x7, that is a 9 x 9 ft gravel pad: about 1.5 tons of crushed stone at 4 in deep, or 2.3 tons at 6 in. A 4 in concrete slab takes 0.67 cubic yards (30 bags of 80 lb mix), and a paver base takes about 29 pavers at 16 in. Full quantities and costs are on the 7x7 shed foundation page.
Does a 7x7 shed need a permit?
At 49 sq ft a 7x7 is exempt by size under all three common thresholds. Height limits (often 10 to 12 ft at the peak), setbacks of 3 to 5 ft from property lines and HOA covenants apply at any size, and wiring always needs an electrical permit. Run your numbers through the permit size checker, then check your local code.
Prices change often; the button shows today's price on Amazon.
Gift guide: shopping for a shed owner or DIYer? See the Shed Holiday Gift Guide 2026 for picks by budget, from the big gift to stocking stuffers.
Frequently asked questions
How many square feet is a 7x7 shed?
A 7x7 shed is 49 square feet of nominal floor area. Usable floor is a little less, because kit dimensions are usually measured at the roof or outside the walls, and resin and steel walls take up floor on every side. Compare the interior dimensions in the kit's spec sheet before you commit, especially if a mower or workbench needs every inch.
Can a riding mower fit in a 7x7 shed?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 7x7 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Do I need a permit for a 7x7 shed?
At 49 sq ft a 7x7 is exempt by size under all three common thresholds. The International Residential Code exempts one-story storage sheds up to 200 sq ft, but many towns lower that to 120 or 100 sq ft, and setbacks, easements, HOA rules and any electrical work apply at every size. Check your local code before you order the kit.
How much gravel do I need for a 7x7 shed?
With a 1 ft border on every side, a 7x7 shed sits on a 9 x 9 ft pad. At 4 in deep that is 1.10 cubic yards, about 1.5 tons of crushed stone including 10 percent for compaction. At 6 in, for soft or wet ground, order 2.3 tons. Lay weed fabric first and frame the pad with treated timber.
How much does a 7x7 shed cost?
The 5 7x7 kits in our catalog run under $1,500. Add roughly $75 to $175 for a gravel pad and a budget for anchors, shelving, a light and a lock; these are rough planning estimates that vary by region and retailer. Amazon prices change often, so check the current price before budgeting.
This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.