Calculator
Gravel Pad Calculator for Sheds
3.2 tons of stone
- Pad size
- 12 x 14 ft (168 sq ft)
- Volume incl. 10% compaction
- 2.28 yd³
- Weight
- 3.2 tons
- Stone cost
- $144
- Weed fabric
- 185 sq ft incl. overlap
- Frame timber (4x6)
- 52 linear ft x 1 course
Most quarries sell by the ton and deliver a minimum of 3 to 5 tons, so round up and keep the extra for the drip edge.
Pad supplies sized to your pad
Each card works from your numbers above and changes as you type. The sizes are the figures printed in each listing; read the listing before you buy.
Fits your numbers
Kijamilee Weed Barrier Landscape Fabric Heavy DutyUnder $50
Roll of 260 sq ft covers the 185 sq ft your 12 x 14 ft pad needs, with the overlap included.
Check price on AmazonFits your numbers
VEVOR Ground Grid 25 ft x 9.5 ftUnder $100
Pack of 237 sq ft covers your 12 x 14 ft pad (168 sq ft). An optional grid that holds the stone; the pad works without one.
Check price on AmazonFits your numbers
Starrey Tamper Tool 8 x 8 InchUnder $50
Hand tamper to compact each gravel layer of the 12 x 14 ft pad. A rented plate compactor is the other route.
Check price on Amazon
Weed barrier, a tamper and a gravel grid sized to your pad. The grid is optional. Amazon shows the list and asks you to confirm before anything is added.
A shed gravel pad is the shed footprint plus 1 ft on every side, 4 to 6 in deep. For a 10x12 shed that is a 12x14 pad: 2.3 cubic yards at 4 in (about 3.2 tons of crushed stone with compaction) or 3.4 yards at 6 in.
A shed pad extends 1 ft past the shed on every side and runs 4 to 6 in deep. Enter your shed size and this calculator gives the pad dimensions, the cubic yards and the tons of crushed stone to order.
More: pad prep gear
Spread from budget to premium.
Prices change often; the button shows today's price on Amazon.
How to size a shed gravel pad
Start from the shed's nominal footprint and add a border, 1 ft on every side unless the kit manual asks for more. Depth is 4 in on firm, well-drained soil and 6 in on clay or wet ground. Multiply length x width x depth, convert to cubic yards, add 10 percent for compaction, then convert to tons at your stone's density.
Use angular crushed stone (3/4 in clean or a crusher-run blend). Angular pieces lock together when compacted. Pea gravel is round, rolls underfoot and never really firms up, so keep it for paths, not structural pads.
Gravel quantities for common sizes
| Shed | Pad (1 ft border) | 4 in | 6 in |
|---|---|---|---|
| 6x8 | 8 x 10 ft | 1.5 t | 2.3 t |
| 8x10 | 10 x 12 ft | 2.3 t | 3.4 t |
| 10x12 | 12 x 14 ft | 3.2 t | 4.8 t |
| 12x16 | 14 x 18 ft | 4.8 t | 7.2 t |
Every size is on the gravel chart.
More shed calculators
- Shed size calculator
- Shed foundation calculator
- Shed anchor calculator
- Roof pitch calculator
- Snow load calculator
- Permit size checker
- Shed cost calculator
- Paint and stain calculator
- Shed ramp calculator
Gift guide: shopping for a shed owner or DIYer? See the Shed Holiday Gift Guide 2026 for picks by budget, from the big gift to stocking stuffers.
Frequently asked questions
How many tons of gravel for a 10x12 shed?
With a 1 ft border the pad is 12 x 14 ft. At 4 in deep that is 2.28 cubic yards including compaction, about 3.2 tons of crushed stone at 1.4 tons per yard. At 6 in it is about 4.8 tons. Most quarries deliver in whole tons with a minimum load, so order 4 or 5 and use the spare for a drip edge.
Do I need weed fabric under a gravel shed pad?
It is cheap insurance. Landscape fabric under the stone stops the gravel sinking into the soil and keeps weeds from growing up through the pad. Overlap seams by about 6 in; the calculator adds 10 percent to the pad area for that.
Do I need a timber frame around the gravel?
It is strongly recommended. A frame of treated 4x6 or 6x6 timber holds the stone in place at the edges, which is exactly where a shed wall bears. Without it, the edges spread over time and the shed settles out of level.
This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.