Shed size · 120 sq ft
What fits in a 10x12 shed?
A 10x12 shed has 120 sq ft of floor. Drawn to scale with a clear aisle, it holds a lawn tractor, a push mower, a wheelbarrow, 2 shelving units, and it can take a 42 in lawn tractor if the door is at least 5 ft wide. Kits this size run $370 to $2,559 on Amazon.
A 10x12 is where a shed starts working as a real outbuilding. 120 sq ft is enough for a lawn tractor with room to walk around it, or bikes plus a small workbench. Below, two common loads are drawn to scale on a 10x12 floor, so you can see what actually fits once you leave yourself a way in.
What fits in a 10x12 shed, drawn to scale
How many of each item fit in a 10x12?
Each row is that item on its own, packed flat on the floor with a clear aisle kept from the door. Hanging bikes and stacking bins beat these numbers; parking a mower across the aisle does not count.
| Item | Fits |
|---|---|
| Riding mower / lawn tractor (42 in deck) | 1 |
| Zero-turn mower (48 to 54 in deck) | 1 |
| Push mower (handle folded) | 10 |
| Two-stage snow blower | 4 |
| Wheelbarrow | 4 |
| Adult bike (on the floor) | 4 |
| Trash or recycling can (96 gal) | 8 |
| Gas grill (off-season) | 10 |
| Shelving unit (18 x 48 in) | 12+ |
| Workbench (2 x 6 ft) | 4 |
| Kayak (floor) | 2 |
Is a 10x12 shed big enough for a riding mower?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 10x12 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Not sure about your own mix of gear? The shed size calculator adds up every item's footprint, multiplies by 1.5 for aisles and reach, and names the smallest standard size that works.
What does a 10x12 shed cost?
We track 20 real 10x12 kits, from $370 to $2,559. At the measured median price per square foot for each material, 120 sq ft works out like this:
| Material | Low (10th pct) | Median | High (90th pct) |
|---|---|---|---|
| Resin (HDPE) | $1,440 | $2,182 | $3,592 |
| Vinyl (PVC) | $1,559 | $2,428 | $3,196 |
| Steel | $370 | $630 | $1,580 |
| Wood | $1,219 | $2,500 | $3,953 |
Kit prices only. Budget about $204 for a 4 in gravel pad, around 6 anchors, and fit-out on top. The shed cost calculator totals it for your material and foundation.
10x12 shed kits on Amazon
Spread across the price range, cheapest first.
Prices change often; the button shows today's price on Amazon.
Every 10x12 kit we track
Want a shortlist instead of the full table? See the best 10x12 sheds at three budgets.
What foundation does a 10x12 shed need?
Most resin and steel kits want a flat, level, well-drained base a little larger than the shed. For a 10x12, that is a 12 x 14 ft gravel pad: about 3.2 tons of crushed stone at 4 in deep, or 4.8 tons at 6 in. A 4 in concrete slab takes 1.63 cubic yards (74 bags of 80 lb mix), and a paver base takes about 71 pavers at 16 in. Full quantities and costs are on the 10x12 shed foundation page.
Does a 10x12 shed need a permit?
At 120 sq ft a 10x12 is exempt under the 120 and 200 sq ft rules, over a 100 sq ft rule. Height limits (often 10 to 12 ft at the peak), setbacks of 3 to 5 ft from property lines and HOA covenants apply at any size, and wiring always needs an electrical permit. Run your numbers through the permit size checker, then check your local code.
Sizes next to a 10x12
- 8x14 shed (112 sq ft, one step smaller)
- 8x15 shed (120 sq ft, one step larger)
- 6x12 shed (72 sq ft)
- 7x12 shed (84 sq ft)
- 8x12 shed (96 sq ft)
- 10x10 shed (100 sq ft)
- 10x14 shed (140 sq ft)
- 10x16 shed (160 sq ft)
Fit out a 10x12
Wall storage is how a small floor holds more than the table above says.
Prices change often; the button shows today's price on Amazon.
Frequently asked questions
How many square feet is a 10x12 shed?
A 10x12 shed is 120 square feet of nominal floor area. Usable floor is a little less, because kit dimensions are usually measured at the roof or outside the walls, and resin and steel walls take up floor on every side. Compare the interior dimensions in the kit's spec sheet before you commit, especially if a mower or workbench needs every inch.
Can a riding mower fit in a 10x12 shed?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 10x12 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Do I need a permit for a 10x12 shed?
At 120 sq ft a 10x12 is exempt under the 120 and 200 sq ft rules, over a 100 sq ft rule. The International Residential Code exempts one-story storage sheds up to 200 sq ft, but many towns lower that to 120 or 100 sq ft, and setbacks, easements, HOA rules and any electrical work apply at every size. Check your local code before you order the kit.
How much gravel do I need for a 10x12 shed?
With a 1 ft border on every side, a 10x12 shed sits on a 12 x 14 ft pad. At 4 in deep that is 2.28 cubic yards, about 3.2 tons of crushed stone including 10 percent for compaction. At 6 in, for soft or wet ground, order 4.8 tons. Lay weed fabric first and frame the pad with treated timber.
How much does a 10x12 shed cost?
The 20 10x12 kits in our catalog run from $370 to $2,559. Add about $204 for a gravel pad, $72 or so for anchors, and $150 or more for shelving, a light and a lock. Prices change often, so check the live price before budgeting.
This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.