ShedSizerMeasure twice, buy once

Shed size · 104 sq ft

What fits in an 8x13 shed?

An 8x13 shed has 104 sq ft of floor. Drawn to scale with a clear aisle, it holds a lawn tractor, a push mower, a wheelbarrow, 2 shelving units, and it can take a 42 in lawn tractor if the door is at least 5 ft wide. Kits this size run $1,741 to $2,300 on Amazon.

An 8x13 is where a shed starts working as a real outbuilding. 104 sq ft is enough for a lawn tractor with room to walk around it, or bikes plus a small workbench. Below, two common loads are drawn to scale on an 8x13 floor, so you can see what actually fits once you leave yourself a way in.

What fits in an 8x13 shed, drawn to scale

Lawn tractor Wheelbarrow Push mower Shelves Shelves door 13 ft 8 ft
Lawn tractor and tools. Drawn to scale, one square is 1 ft. The dashed band is the clear aisle from the door.
Bike Bike Push mower Bike Bike Shelves door 13 ft 8 ft
Bikes and workbench. Drawn to scale, one square is 1 ft. The dashed band is the clear aisle from the door. Does not fit: Workbench.

How many of each item fit in an 8x13?

Each row is that item on its own, packed flat on the floor with a clear aisle kept from the door. Hanging bikes and stacking bins beat these numbers; parking a mower across the aisle does not count.

ItemFits
Riding mower / lawn tractor (42 in deck)1
Zero-turn mower (48 to 54 in deck)1
Push mower (handle folded)8
Two-stage snow blower6
Wheelbarrow6
Adult bike (on the floor)4
Trash or recycling can (96 gal)12+
Gas grill (off-season)8
Shelving unit (18 x 48 in)10
Workbench (2 x 6 ft)4
Kayak (floor)none

Is an 8x13 shed big enough for a riding mower?

Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in an 8x13 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.

Not sure about your own mix of gear? The shed size calculator adds up every item's footprint, multiplies by 1.5 for aisles and reach, and names the smallest standard size that works.

What does an 8x13 shed cost?

We track 3 real 8x13 kits, from $1,741 to $2,300. At the measured median price per square foot for each material, 104 sq ft works out like this:

MaterialLow (10th pct)MedianHigh (90th pct)
Resin (HDPE)$1,248$1,891$3,113
Vinyl (PVC)$1,351$2,105$2,770
Steel$321$546$1,369
Wood$1,056$2,167$3,426

Kit prices only. Budget about $188 for a 4 in gravel pad, around 6 anchors, and fit-out on top. The shed cost calculator totals it for your material and foundation.

8x13 shed kits on Amazon

Spread across the price range, cheapest first.

Prices change often; the button shows today's price on Amazon.

Every 8x13 kit we track

KitFootprintMaterialFloorPrice
Lifetime 6402 Outdoor Storage Shed8 x 12.5 ftResin (HDPE)not stated$1,741
Keter Newton Plus 7.5x13 Ft All-Weather Storage Shed7.5 x 13 ftResin (HDPE)not stated$1,782
Suncast 8x13 Ft Resin Shed8 x 13 ftResin (HDPE)included$2,300

What foundation does an 8x13 shed need?

Most resin and steel kits want a flat, level, well-drained base a little larger than the shed. For an 8x13, that is a 10 x 15 ft gravel pad: about 2.9 tons of crushed stone at 4 in deep, or 4.3 tons at 6 in. A 4 in concrete slab takes 1.41 cubic yards (64 bags of 80 lb mix), and a paver base takes about 62 pavers at 16 in. Full quantities and costs are on the 8x13 shed foundation page.

Does an 8x13 shed need a permit?

At 104 sq ft an 8x13 is exempt under the 120 and 200 sq ft rules, over a 100 sq ft rule. Height limits (often 10 to 12 ft at the peak), setbacks of 3 to 5 ft from property lines and HOA covenants apply at any size, and wiring always needs an electrical permit. Run your numbers through the permit size checker, then check your local code.

Sizes next to an 8x13

Fit out an 8x13

Wall storage is how a small floor holds more than the table above says.

Prices change often; the button shows today's price on Amazon.

Frequently asked questions

How many square feet is an 8x13 shed?

An 8x13 shed is 104 square feet of nominal floor area. Usable floor is a little less, because kit dimensions are usually measured at the roof or outside the walls, and resin and steel walls take up floor on every side. Compare the interior dimensions in the kit's spec sheet before you commit, especially if a mower or workbench needs every inch.

Can a riding mower fit in an 8x13 shed?

Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in an 8x13 with room to walk past it. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.

Do I need a permit for an 8x13 shed?

At 104 sq ft an 8x13 is exempt under the 120 and 200 sq ft rules, over a 100 sq ft rule. The International Residential Code exempts one-story storage sheds up to 200 sq ft, but many towns lower that to 120 or 100 sq ft, and setbacks, easements, HOA rules and any electrical work apply at every size. Check your local code before you order the kit.

How much gravel do I need for an 8x13 shed?

With a 1 ft border on every side, an 8x13 shed sits on a 10 x 15 ft pad. At 4 in deep that is 2.04 cubic yards, about 2.9 tons of crushed stone including 10 percent for compaction. At 6 in, for soft or wet ground, order 4.3 tons. Lay weed fabric first and frame the pad with treated timber.

How much does an 8x13 shed cost?

The 3 8x13 kits in our catalog run from $1,741 to $2,300. Add about $188 for a gravel pad, $72 or so for anchors, and $150 or more for shelving, a light and a lock. Prices change often, so check the live price before budgeting.

This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.